Forklift Chain

Chains for Forklifts - The life of the lift truck lift chains could actually be extended with proper maintenance and care. Lubricating properly is actually an excellent method to extend the capability of this forklift component. It is really vital to apply oil periodically with a brush or whichever lube application tool. The volume and frequency of oil application must be adequate in order to avoid whatever rust discoloration of oil within the joints. This reddish brown discoloration usually signals that the lift chains have not been correctly lubricated. If this particular situation has happened, it is very important to lubricate the lift chains immediately.

It is normal for several metal to metal contact to occur through lift chain operation. This can cause components to wear out in time. The industry standard considers a lift chain to be worn out if three percent elongation has happened. So as to avoid the scary likelihood of a catastrophic lift chain failure from taking place, the manufacturer greatly recommends that the lift chain be replaced before it reaches 3% elongation. The lift chain gets longer due to progressive joint wear which elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

Another factor to ensuring good lift chain maintenance is to check the clevis pins on the lift chain for signs of wear and tear. The lift chains have been put together so that the tapered faces of the clevis pin are lined up. Normally, rotation of the clevis pins is often caused by shock loading. Shock loading happens if the chain is loose and then suddenly a load is applied. This causes the chain to experience a shock as it 'snaps' under the load tension. Without the proper lubrication, in this particular situation, the pins could rotate in the chain's link. If this situation occurs, the lift chains must be replaced at once. It is very important to always replace the lift chains in pairs so as to ensure even wear.


Click to Download the pdf

Forklift Parts

Attachments for Straight Boom Lift

Attachments for Straight Boom Lift - Forklift attachments are really designed in order to increase the number of functions which a forklift can perform. Usually, forklifts are made in order to hoist loads and transport them from a place to a different place. With the use of accessories, the lift truck can do many different tasks. Forklifts have forks which...

More

---

Forklift Fuel Systems

Fuel System for Forklift - The fuel system is responsible for providing your engine the diesel or gasoline it needs to be able to run. If any of the different components in the fuel system break down, your engine will not function right. There are the major components of the fuel system listed underneath: Fuel Tank: The fuel tank holds...

More

---

Parts for Electric Pallet Jacks

Parts for Electric Pallet Jacks - Pallets are somewhat an important component of the manufacturing trade and pallet handling could be accomplished by a variety of means. Pallet racks, forklifts, pallet trucks and hand jacks are a few of machines most frequently used for pallet handling in the modern work place. Nearly all pallets are usually stacked on huge steel...

More

---

Crown Forklift Part

Crown Forklift Part - Two brothers Allen A. Dicke and the late Carl H. Dicke formed the Crown company in 1945. Carl's son, James F. Dicke joined the family company later that year. At present, his son, James F. Dicke II, is Chairman and CEO. James F. Dicke III, serves as the company President at the moment, becoming the fourth...

More

---

Starter for Forklifts

Starter for Forklifts - The starter motor these days is usually either a series-parallel wound direct current electric motor that has a starter solenoid, which is similar to a relay mounted on it, or it can be a permanent-magnet composition. Once current from the starting battery is applied to the solenoid, mainly via a key-operated switch, the solenoid engages a...

More

---

Parts for Gas Forklifts

Part for Gas Forklift - In 1893, inventor Rudolf Diesel developed the diesel engine. The combustion engine functions by providing the heat of compression to be able to burn the fuel and initiate ignition. The fuel is then injected into the combustion chamber. This design is in contrast to spark ignition engines, like for instance petrol or gasoline engines that...

More

---

Warehouse Forklift Attachment

Warehouse Forklift Attachments - Extensively utilized in delivery facilities, the pneumatic forklift or pallet vehicle, may be utilized to transfer materials that are positioned on top of pallets. A pneumatic forklift usually has a pair of metallic blades mounted on a wheeled counterweight that also has a pump. The pump is used to raise and lower the forks. It is...

More

---

Attachments for Portable Manlift

Portable Manlift Attachment - A very great way to use industrial machines if needed for only brief periods is to lease the item from an equipment leasing business. These leasing businesses assist contracting businesses and several homeowners perform needed jobs while saving their clients somewhat a bit of cash in operating costs. A variety of industrial equipment are accessible for...

More

---